Sealing & Protective Coatings
Solvent and water-based sealers, high-gloss and matte finishes, and slip-resistant additives that protect color, shed stains and prevent damage.
- Sheen: Matte, satin, gloss
- Typical time: 1 to 2 working days
- Recoat: Every 2 to 3 years
What it is, and why it works.
Sealer is the finishing step that decides how a stamped surface looks and lasts. A good acrylic sealer deepens the color, adds a sheen from matte to high gloss, repels water, oil and salt and makes cleaning easy. A poor or mismatched one turns cloudy, peels or leaves the surface slippery.
We match the sealer to the job: solvent-based acrylic for rich color on driveways, water-based for lower odor and cooler surfaces, polyurethane or epoxy for higher-wear areas and slip-resistant grit for pools and steps. In Nashville's humid summers and freeze-thaw winters, sealing on schedule is the cheapest insurance your concrete can have.
Four things done right.
Color enhancement
Wet-look depth in the sheen you choose.
Stain resistance
Helps shed oil, grease and leaf tannins.
Slip-resistant options
Grit added for pools, steps and shade.
Matched chemistry
Sealer selected for sun, traffic and substrate.
From idea to sealing & coatings.
- 01
Test and prep
Clean, dry and test absorption.
- 02
Choose the sealer
Pick sheen and chemistry.
- 03
Apply in thin coats
Roll or spray to avoid blushing.
- 04
Cure
Keep traffic off until fully cured.
Often poured together.
Repair, Care & PlanningResealing & Color RefreshRecover faded color and sheen with a professional reseal.New life for last decade's patio.
Stamped SurfacesStamped Concrete PatiosOne-piece patios with the look of slate, flagstone, brick or wood.Slate, stone or brick, poured in one piece and built to last.
Repair, Care & PlanningMaintenance PlansAnnual cleaning and scheduled resealing, handled for you.A little care, every season, keeps it looking brand new.Sealing & Protective Coatings across Middle Tennessee.
We install this service in 28 cities, from Nashville to Franklin, Murfreesboro and beyond.
Sealing & Coatings: common questions
How often should stamped concrete be resealed?
Most surfaces need resealing every two to three years, sooner in full sun or heavy traffic.
Why did my sealer turn white?
Moisture trapped under the sealer or an overly thick coat can cause blushing. We fix it with a solvent treatment and apply thin coats going forward.
How do I get a price for sealing & coatings?
Fill in the form or call 615-357-7797. We schedule a free visit, bring samples and send a written estimate that lists exactly what is included.
Ready to talk about sealing & coatings?
A free visit, cured samples and a written estimate. A real person calls back, usually the same day.